View XC62RPP1502MB_4130242.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

XC62RP Series
Positive Voltage Regulators for Voltage Reference Source
ETR0314_001
GENERAL DESCRIPTION
The XC62RP series are highly precise, low power consumption, positive voltage regulators, for voltage reference source, manufactured using CMOS and laser trimming technologies. SOT-23 (150mW), SOT-89 (500mW) and TO-92 (300mW) packages are available.
APPLICATIONS
Battery powered equipment Reference voltage sources Cameras and video recorders Palmtops
FEATURES
Maximum Output Current : 6.0mA (within max. power dissipation, VOUT=2.0V) Output Voltage Range Highly Accurate : 1.5V ~ 3.5V in 100mV increments : Setting Voltage accuracy2% (1%for semi-custom products) Low Power Consumption : 3.2A (VOUT=2.0) (TYP.) Output Voltage Temperature Characteristics : 100ppm/(TYP.) Line Regulation Dropout Voltage Ultra Small Packages : 0.2%/V (TYP.) : 140mV @ 300A : SOT-23 (150mW) mini-mold SOT-89 (500mW) mini-power mold TO-92 (300mW) CMOS Low Power Consumption
TYPICAL APPLICATION CIRCUIT
TYPICAL PERFORMANCE CHARACTERISTICS
Please use with a load capacitance (CL) of less than 0.1F.
Ambient Temperature: Topr ()
1/14
XC62RP Series
PIN CONFIGURATION
SOT-23 (TOP VIEW)
PIN ASSIGNMENT
PIN NUMBER SOT-23 1 3 2 SOT-89 1 2 3 TO-92 (T) 1 2 3 TO-92 (L) 2 1 3 PIN NAME VSS VIN VOUT FUNCTION Ground Supply Voltage Input Output
PRODUCT CLASSIFICATION
Ordering Information
XC62R DESIGNATOR DESCRIPTION Polarity of Output Voltage Output Voltage Temperature Coefficients Output Voltage Accuracy SYMBOL P 15 ~ 35 0 1 2 M P T L R L H B : Positive : e.g. VOUT1.5V=1, =5 VOUT3.0V=3, =0 :100ppm (TYP.) :1% (Semi-custom) :2% : SOT-23 : SOT-89 : TO-92 (standard) : TO-92 (Custom pin configuration) : Embossed tape, standard feed : Embossed tape, reverse feed : Paper tape (TO-92) : Bag (TO-92) DESCRIPTION
Package
Device Orientation
2/14
XC62RP
Series
BLOCK DIAGRAM
ABSOLUTE MAXIMUM RATINGS
Ta=25OC PARAMETER Input Voltage Output Current Output Voltage SOT-23 Power Dissipation SOT-89 TO-92 Operating Temperature Range Storage Temperature Range Topr Tstg Pd SYMBOL VIN IOUT VOUT RATINGS 12.0 50* VSS-0.3~VIN+0.3 150 500 300 -30 ~ +80 -40 ~ +125 mW UNITS V mA V
Note: Please ensure that IOUT is less than Pd / (VIN-VOUT).
3/14
XC62RP Series
ELECTRICAL CHARACTERISTICS
XC62RP1602 VOUT(T)=1.6V (*1) SYMBOL VOUT(E) (*2) IOUT max VOUT Vdif1 Vdif2 ISS VOUT VIN VOUT VIN VOUT ToprVOUT IOUT=100A -30Topr80 CONDITIONS IOUT=100A VIN=2.6V VIN=2.6V, VOUT(E)VOUT(T) x 0.95 VIN=2.6 V 100AIOUT 300A IOUT=100A IOUT=300A VIN=2.6V IOUT=100A 2.6VVIN6.0V MIN. 1.568 4.0 TYP. 1.600 20 30 50 3.0 0.2 100 MAX. 1.632 40 80 140 5.8 0.3 6.0 Ta=25 UNITS CIRCUIT V mA mV mV mV A %/V V ppm/ 1 1 1 1 1 2 1 1
PARAMETER Output Voltage Maximum Output Current Load Regulation Dropout Voltage (*3) Supply Current Line Regulation Input Voltage Output Voltage Temperature Characteristics
XC62RP2002
VOUT(T)=2.0V (*1) SYMBOL VOUT(E) (*2) IOUT max VOUT Vdif1 Vdif2 CONDITIONS IOUT=100A VIN=3.0V VIN=3.0V, VOUT(E)VOUT(T) x 0.95 VIN=3.0 V 100AIOUT300A IOUT=100A IOUT=300A VIN=3.0V IOUT=100A 3.0VVIN6.0V IOUT=100A -30Topr80 MIN. 1.960 6.0 TYP. 2.000 20 30 50 3.2 0.2 100 MAX. 2.040 40 80 140 6.2 0.3 6.0 -
Ta=25 UNITS CIRCUIT V mA mV mV mV A %/V V ppm/ 1 1 1 1 1 2 1 1
PARAMETER Output Voltage Maximum Output Current Load Regulation Dropout Voltage (*3) Supply Current Line Regulation Input Voltage Output Voltage Temperature Characteristics
ISS VOUT VINVOUT VIN VOUT ToprVOUT
4/14
XC62RP
Series
ELECTRICAL CHARACTERISTICS (Continued)
XC62RP2502 VOUT(T)=2.5V (*1) SYMBOL VOUT(E) (*2) IOUT max VOUT Vdif1 Vdif2 Supply Current Line Regulation Input Voltage Output Voltage Temperature Characteristics ISS VOUT VINVOUT VIN VOUT ToprVOUT CONDITIONS IOUT=100A VIN=3.5V VIN=3.5V, VOUT(E)VOUT(T) x 0.95 VIN=3.5 V 100AIOUT300A IOUT=100A IOUT=300A VIN=3.5V IOUT=100A 3.5VVIN6.0V IOUT=100A -30Topr80 MIN. 2.450 8.0 TYP. 2.500 20 30 50 3.5 0.2 100 MAX. 2.550 40 80 140 6.8 0.3 6.0 Ta=25 UNITS CIRCUIT V mA mV mV mV A %/V V ppm/ 1 1 1 1 1 2 1 1
PARAMETER Output Voltage Maximum Output Current Load Regulation Dropout Voltage (*3)
XC62RP3002
VOUT(T)=3.0V (*1) SYMBOL VOUT(E) (*2) IOUT max VOUT Vdif1 Vdif2 CONDITIONS IOUT=100A VIN=4.0V VIN=4.0V, VOUT(E)VOUT(T) x 0.95 VIN=4.0 V 100AIOUT300A IOUT=100A IOUT=300A VIN=4.0V IOUT=100A 4.0VVIN6.0V IOUT=100A -30Topr 80 MIN. 2.940 10.0 TYP. 3.000 20 30 50 3.8 0.2 100 MAX. 3.060 40 80 140 7.3 0.3 6.0 -
Ta=25 UNITS CIRCUIT V mA mV mV mV A %/V V ppm/ 1 1 1 1 1 2 1 1
PARAMETER Output Voltage Maximum Output Current Load Regulation Dropout Voltage (*3) Supply Current Line Regulation Input Voltage Output Voltage Temperature Characteristics
NOTE:
ISS VOUT VINVOUT VIN VOUT ToprVOUT
*1: VOUT(T)=Specified output voltage . *2: VOUT(E)=Effective output voltage (i.e. the output voltage when "VOUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IOUT value). *3: Vdif= {VIN1 (*5)-VOUT1 (*4)} *4: VOUT1= A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT {VOUT(T)+1.0V} is input. *5: VIN1= The input voltage when VOUT1 appears as input voltage is gradually decreased.
5/14
XC62RP Series
TYPICAL APPLICATION CIRCUIT
NOTES ON USE
1. Please use with a load capacitance, CL, of less than 0.1F and in 0.01F steps. 2. Since short-circuit protection is not built-in, the IC may be damaged by rush current should the output pin be connected to the Ground pin. 3. When the load capacitance, CL, is small, overshoot will be produced when the power is switched on. 4. As the output pin's current is only a few A, output voltage will increase should output be pulled-up by means of a resistor.
TEST CIRCUITS
Circuit 1
Circuit 2
6/14
XC62RP
Series
TYPICAL PERFORMANCE CHARACTERISTICS
(1) Output Voltage vs. Output Current
7/14
XC62RP Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Output Voltage vs. Input Voltage
8/14
XC62RP
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(3) Dropout Voltage vs. Output Current
(4) Supply Current vs. Input Voltage
9/14
XC62RP Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(5) Output Voltage vs. Ambient Temperature
.
Ambient Temperature:Ta ()
Ambient Temperature:Ta ()
Ambient Temperature:Ta ()
Ambient Temperature:Ta ()
(6) Supply Current vs. Ambient Temperature
Ambient Temperature:Ta ()
Ambient Temperature:Ta ()
Ambient Temperature:Ta ()
Ambient Temperature:Ta ()
10/14
XC62RP
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(7) Input Transient Response
(8) Input Transient Response 2
(9) Load Transient Response
(10) Ripple Rejection Rate
11/14
XC62RP Series
PACKAGING INFORMATION
SOT-23 SOT-89
TO-92
12/14
XC62RP
Series
MARKING RULE
SOT-23, SOT-89
Not used
3
Represents integer of output voltage

MARK
VOLTAGE (V)
1
2
SOT-23 (TOP VIEW)
A B C D
0.x 1.x 2.x 3.x
Represents decimal number of output voltage

MARK
VOLTAGE (V)
MARK
VOLTAGE (V)
1
2
3
SOT-89 (TOP VIEW)
A B C D E
x.0 x.1 x.2 x.3 x.4
F H K L M
x.5 x.6 x.7 x.8 x.9
Represents production lot number 0 to 9, A to Z repeated (G, I, J, O, Q, W excepted)
TO-92
Represents polarity of output voltage MARK P Represents output voltage MARK 3 5 3 0 POLARITY + (Positive)
OUTPUT VOLTAGE (V) 3.3 5.0
Represents temperature characteristics MARK TEMPERATURE CHARACTERISTICS 0 100 ppm (TYP.) Represents output voltage accuracy MARK OUTPUT VOLTAGE ACCURACY 1 2 Within 1% (semi-custom) Within 2%
Represents a least significant digit of production year MARK PRODUCTION YEAR 3 4 2003 2004
Represents production lot number 0 to 9, A to Z repeated (G, I, J, O, Q, W excepted)
13/14
XC62RP Series
1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this catalog is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this catalog. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this catalog. 4. The products in this catalog are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this catalog within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this catalog may be copied or reproduced without the prior permission of Torex Semiconductor Ltd.
14/14

▲Up To Search▲

Price & Availability of XC62RPP1502MB

	To Download XC62RPP1502MB Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .